Master Your Eahora Kick Scooter Dashboard

Riding an electric scooter through city streets? Your dashboard is your command center. The Eahora UKS6 central display—featuring a durable 4.5-inch negative LCD screen—clearly shows speed, battery level, mileage, and more. Encased in impact-resistant ABS plastic and scratch-proof tempered glass, it withstands both daily commutes and weekend adventures. Let’s dive into its powerful features.

I. Daily Operation Guide

Function	Operation Steps
Power On/Off	Long-press the power button for 2 seconds to start; long-press for 1 second to shut down. Auto-off after 10 minutes (adjustable).
Gear Shift	Click +/- buttons to cycle through 1-5 gears.
Data Display	Press M to cycle modes: TRIP → ODO → TIME → POWER → Temperature.
Lights	Long-press M 1s: turns on headlight + night mode (disables light sensor). Long-press again to turn off.
Walk Mode	Long-press - 1s for 6km/h walk assist; release to exit.
Drive Mode	Long-press + to toggle single/rear drive (no icon) or dual-drive (icon displayed).

II. Basic Settings

Parameter	Setting	Method
P1	Screen Brightness	Press M → Adjust 1-5 (1=dimmest) with +/- → Press M to save.
P2	Auto-Off Timer	Choose 1- 9min or OFF with +/- → Press M to confirm.
P3	Unit (km/h vs MPH)	Select 0 (km/h) or 1 (MPH) → Press M.
P4	Cruise Control	Select 0 (OFF) or 1 (ON) → Press M.
P5	Battery Display	Choose 0 (Voltage) or 1 (Percentage) → Press M.
A05	Advanced Settings	Enter password "1111" → Press M to access.

III. Advanced Settings

Parameter	Setting	Method
A3	Speed Limit (%)	Set 0-100% (e.g., 80% = 80% max speed) → Press M.
A4	ABS Brake	Select 0 (OFF) or 1 (ON) → Press M.
A8	Light Sensor Sensitivity	Adjust 1-5 (1=least sensitive) → Affects auto-backlight response.
A9	Zero-Start Mode	Select 0 (start while stationary) or 1 (requires push-start) → Press M.

IV. Password Setup

1. Enable/Disable Password

Go to Menu → PA5 Password Setting → Toggle ON/OFF with +/- → Press M to confirm.

2. Change Password

Enter 4-digit new code (default: 1111) → Press M to cycle digits → "SUCCE" confirms success.
Password required on next startup.

V. Critical Error Codes

Code	Description
1	Motor Phase
2	Hall Sensor Error
4	Throttle Error
5	Under Voltage Protection
6	Controller Error
7	Communication Error
8	Over-Temperature Protection

Why the UKS6 Dominates

Clarity & Durability: Negative LCD + tempered glass ensures visibility in all conditions.
Customization: Fine-tune speed limits, ABS, start modes, and displays.
Safety First: Walk mode, error alerts, and password protection.
Smart Features: NFC-ready for future upgrades.